dsc02280.jpg

Overall view of the side of the nozzle extension. This view is taken from approximately the same position as dsc02255.jpg.

The "tabs" welded to the nozzle extension are nutplates to mount the engine's thermal insulation set. The larger tab, on the top hatband to the left of the two round connectors, is a "lifting lug," used in handling the extension.

Near the upper right of this picture, on the hatband below the two round connectors, is the nozzle extension's ID plate.

At center bottom, note the hold-down clamp to prevent anyone from picking up the engine and carrying it away ...